Automatic 4 Cavity Plastic Bottle Blow Molding Machine for 0.1-2 Ltr

Product Code:SD-A4

Product Description:

blow molding machine Functions and Features:
1) The blow molding machine suitable for producing PET plastic containers and bottles from 100-2000ml. It is widely used to produce the carbonated bottle ,mineral water, carbonated drink bottle, pesticide bottle oil bottle cosmetics, wide-mouth bottle etc.
2) The blow molding machine adopting double crank to adjust mould ,heavy locking mould, stable and fast ,Adopt infrared oven to heat the perform ,the perform rotated and heated equally.
3) The air system of blow molding machine has been divided into two parts: pneumatic action part and bottle blow part to meet the different requirements for the action and blow.It can provide sufficient and steady high pressure for blowing large irregular shaped bottles.
4) The blow molding machine is also equipped with muffler and oiling system to lubricate the mechanical part of the machine.
5) The blow molding machine can be operated in the step-by-step mode and the semi-auto mode.
6) The machine is small with low investment, safety lock system for the blow molding system, ensure safety operating.
7) Volume exchange will be through the PLC control panel by setting the film sending time and filling time only.
8) One person can operate semi-auto perform loading and product bottle discharging and combining the fully auto blower process for this blow molding machine.
9) Space saving and low cost for equipment investment.
10) Power supply of blow molding machine: 3phase,380/220V, 50/60HZ

Product description

F.Y.I.: According to your request, we can adopt air cylinder driving, servo motor driving;mold clamping type; electronic components of different brands for the blow molding machine, all of them are optional for you.

Plastic bolw molding machine Specification is as below:

No item blow molding machine specification
1 air cylinder Airtac brand or Festo brand optional
2 Production capacity 900 to 10000 bottles per hour
3 PLC Omron/ Mitsubishi/ siemens brand
4 electronic component Schneider brand
5 Bottle size 100ml to 2 Liter

blow molding machine Device function:

This blow molding machine has both automatic and manual modes. While in automatic mode, the device of blow molding machine operates automatically. It runs when the pure water is at low level, stops at high lever and at water shortage stage automatically.
Short circuit, and water shortage of pressure pump protection.

Our Services
Simple Sample is acceptable. We also accept OEM and customized order with special requirements.

Regarding warranty, we offer 1 year warranty/3000 hours warranty for blow molding machine, and we also offer lifetime maintenance.

Shine Dew Water can also provide one-stop service/turnkey project to you, from raw material to machines process, also include factory drawing design, workshop layout design, factory construction, label/bottle shape/package design, labor training, installation and etc.


1. Why price of reverse osmosis system is so expensive?!

Answer: Firstly, pls noted that all proposals are made according to your special requirement, so that we can ensure our proposal is the most suitable to you. Maybe some others’ are based on normal condition, therefore there are some difference among the proposals.

2. For reverse osmosis system, Where need attention besides price.

Answer: Besides the price, we also need pay attention on quality, product  construction,  design principle,  configuration of part list,  reasonability,  convenience of operation, professional, service and etc.

3. How can reduce price/improve quality of reverse osmosis system?

Answer:  The first proposal is preliminary design, as a professional buyer, pls don’t only focus on the price. If you have any question or request, pls don’t hesitate to contact us. Then we will adjust the configuration and quality according to your request. Your feedback will lead us to make the proposal to match your request.

4. Can you provide turnkey project service?

Answer:  Yes, of course, we can provide the full set of turnkey project service to you.

5. How long of your warranty?

Answer:  Regarding warranty, normally we offer 1 year warranty/3000 hours warranty, and we also offer lifetime maintenance.

6. Do you accept OEM order?

Answer:  Yes, we have strong design team and technical team. Therefore we can also accept OEM and customized order with special requirements.